What makes the Miura EX Series different from a standard firetube boiler like Cleaver-Brooks or Hurst?

The EX Series uses once-through watertube technology, which means far less water is held at pressure at any given time. This translates to faster startup, better load response, lower thermal stress, and a fundamentally different risk profile compared to firetube designs. It's not an incremental improvement. It's a different engineering approach.

What fuel options are available across the EX Series?

Most EX Series models operate as dual fuel steam boilers, capable of running on natural gas, propane, or No. 2 fuel oil. The natural gas propane oil boiler configuration gives operators real flexibility when fuel supply or pricing shifts. The EXN-300 maintains full dual-fuel capability while meeting low-NOx emissions requirements.

What pressure ratings are available in the EX Series and EXH Series?

The extended EX platform covers 170 MAWP, 250 MAWP, and 300 MAWP pressure configurations, with the EXH Series high pressure boiler reaching the 300 MAWP rating. For most commercial and industrial applications, one of those configurations will match the requirement without custom engineering.

How quickly does a Miura EX boiler reach full steam?

Approximately five minutes from a cold start. This is one of the most cited advantages over firetube alternatives, which can take 30 minutes or more to come online. In facilities where demand is variable or boilers cycle frequently, that startup time has a direct impact on operational efficiency.

Is the EXN-300 compliant with Florida and federal NOx emissions regulations?

The Miura EXN-300 low NOx dual fuel boiler achieves 30 ppm NOx performance on both fuel configurations. This meets or exceeds the requirements of most active air quality management districts. BTU can provide specific compliance documentation for Florida-based installations upon request.

Can Boiler Technologies Unlimited support a multi-boiler EX Series installation?

Yes. The modular dual fuel steam boiler architecture of the EX Series is specifically designed for multi-unit configurations. BTU assists with system design, load balancing, redundancy planning, installation, and commissioning for any scale of EX Series deployment, from a single unit to a full plant-wide system.

Does BTU service Miura EX boilers after installation?

That's the baseline expectation. Boiler Technologies Unlimited provides 24/7 emergency service, scheduled preventive maintenance, parts supply, and ongoing technical support for every Miura EX system the team installs or takes over from a previous servicer. Facilities across Florida and nationally have access to that support structure.

How does BTU handle facilities currently running Cleaver-Brooks, Fulton, or Hurst equipment that want to transition to Miura?

BTU conducts a site assessment, reviews current load profiles and space constraints, and builds a transition plan that accounts for installation sequencing, downtime minimization, and operator training. The goal is a transition that doesn't interrupt production. Most facilities are surprised by how manageable the process is when it's planned correctly.

Miura EX Series Steam Boilers

Boiler Technologies Unlimited is Florida's authorized Miura EX boiler dealer, and the EX Series Steam Boilers represent the clearest case we can make for why once-through watertube technology has outpaced traditional firetube designs. If your facility runs on steam, this is the product line worth understanding.

Based in Lithia, FL, and serving commercial and industrial operations across Tampa, Orlando, Miami, Jacksonville, St. Petersburg, Sarasota, Fort Lauderdale, and every corner of the state, BTU gives Florida businesses direct access to the most sophisticated modular steam systems on the market. Plus, with nationwide online sales, no operation anywhere in the US is out of reach.

What Makes the Miura LX Boiler a Different Category of Equipment

Most facility managers upgrading from a Cleaver-Brooks, Hurst, or Fulton firetube unit aren't just looking for a newer version of what they already have. They're looking for a system that solves the problems the old unit created.

Firetube boilers carry a fundamental design constraint that doesn't improve with age or maintenance. Large water volumes require 30 to 45 minutes to reach operating pressure. Standby fuel consumption continues whether or not steam is being drawn. Partial load efficiency is poor. A single large unit represents a single point of failure, and in a pharmaceutical plant or hotel laundry operation, that failure scenario has consequences that extend well beyond a repair bill.

The Miura LX boiler is a watertube steam boiler operating on once-through technology. It holds a fraction of the water of a comparable firetube system. Full operating pressure from a cold start in under five minutes. That's not incremental improvement over a Cleaver-Brooks or Fulton. It's a different engineering approach producing a different operational result.

For Florida facilities running in high-ambient-temperature, high-humidity conditions, that responsiveness and efficiency translates directly into lower operating cost and higher production reliability.

The EX Series Lineup: Models Built for Real Industrial Demands

The EX Series isn't one boiler. It's a platform. Each model is engineered to a specific pressure rating, fuel configuration, and output class — and Boiler Technologies Unlimited stocks and supports the full range across Florida and nationwide.

Miura EX-100 Steam Boiler

The Miura EX-100 steam boiler is the entry point into the EX Series and one of the most capable 100 HP once-through systems available today. Designed for facilities with moderate steam loads that still demand precision and reliability, the EX-100 reaches full steam in approximately five minutes. It operates on natural gas or No. 2 fuel oil, making it a true dual fuel steam boiler that gives operators real flexibility when fuel availability or pricing shifts.

For Florida operations dealing with seasonal utility demand or fuel supply variation, that dual-fuel capability is not a luxury. It's risk management

Miura EX-150 Steam Boiler

Step up in output, not in complexity. The Miura EX-150 steam boiler delivers 150 HP of steam output while retaining all the core advantages of the EX platform — rapid startup, modular footprint, and watertube dual fuel boiler architecture that reduces standby losses and improves efficiency under variable loads.

This model fits naturally into mid-size manufacturing, food processing, and commercial laundry operations across Central and South Florida where demand isn't constant but reliability is non-negotiable.

Miura EX-200 Steam Boiler

The Miura EX-200 steam boiler marks the point where the EX Series delivers true industrial performance. At 200 HP, it handles heavier process loads without the size and inefficiency of traditional firetube systems. Its modular dual-fuel design allows it to fit into existing mechanical rooms or serve as the core of a multi-boiler setup. As a natural gas, propane, or oil boiler, the EX-200 offers flexibility to run a primary fuel while maintaining a reliable secondary option—critical in today’s unpredictable energy market. For large commercial and industrial operations across Tampa Bay, Orlando, and South Florida, Boiler Technologies Unlimited provides delivery, installation, and full commissioning support for complex boiler system integrations.

Miura EX-300 Steam Boiler

The largest standard unit in the EX Series. The Miura EX-300 steam boiler brings 300 HP of once-through steam generation to operations that need serious output without the space and risk commitment of a conventional large-shell firetube boiler.

This is the unit that typically makes facility engineers reconsider what they thought they knew about industrial steam capacity. A single EX-300 can carry a substantial load. Multiple EX-300 units in a modular array can carry an entire facility. Boiler Technologies Unlimited helps Florida and national clients design those configurations correctly, accounting for redundancy, load balancing, and long-term operational cost.

The 100 to 300 HP dual fuel boiler range covers virtually every industrial and commercial steam application currently running on Hurst, Fulton, or mid-range Cleaver-Brooks equipment. The transition path is shorter than most expect.

EXH Series: When Standard Pressure Isn't Enough

A white Miura industrial boiler unit with a control panel on the front and exposed mechanical components on top.

Miura EXH Series High Pressure Boiler

Not every application runs at standard steam pressure. Pharmaceutical manufacturing, certain chemical processing operations, and high-demand industrial processes require steam at pressures that standard boiler configurations cannot safely or efficiently deliver.

The Miura EXH Series high pressure boiler addresses that directly. Rated to 300 MAWP, the EXH Series is one of the most capable high-pressure watertube platforms in its class. For operations that have historically relied on large, slow-to-respond firetube boilers to meet high-pressure demands, the EXH Series is a genuine upgrade in every measurable category.

A 300 MAWP high pressure boiler in the Miura once-through configuration starts faster, responds to load changes more efficiently, and carries a dramatically lower catastrophic failure risk than a comparable shell-and-tube design. BTU works with pharmaceutical and biotech facilities throughout Florida to deploy and maintain EXH systems at spec, with the documentation and compliance support those industries require.

For operations that need elevated pressure but not at the EXH ceiling, the 250 MAWP steam boiler and 170 MAWP steam boiler configurations within the extended EX platform provide a pressure range that maps cleanly to most industrial and commercial requirements.

Miura EXN-300 Low NOx Dual Fuel Boiler

Air quality compliance is not optional. In Florida and across much of the US, NOx emissions from combustion equipment are subject to regulatory limits that are only tightening over time.

The Miura EXN-300 low NOx dual fuel boiler was engineered for exactly this environment. Achieving 30 ppm NOx dual fuel boiler performance, the EXN-300 delivers the full output and fuel flexibility of the EX-300 platform while meeting stringent emissions standards. For facilities in air quality management districts with active NOx regulations, this isn't a nice-to-have. It's the only viable path forward.

Dual fuel boiler fuel switching on the EXN-300 is controlled and integrated, not a workaround. The system is designed to operate on either gas oil steam boiler configurations or natural gas propane oil boiler configurations without compromising emissions performance on either fuel. That's the level of engineering that separates Miura from competitors that bolt on aftermarket emissions compliance solutions.

Boiler Technologies Unlimited supports EXN-300 installations across Florida, with ongoing service and compliance documentation available to facilities that require it.

Why Boiler Technologies Unlimited Is the Right Source for Miura EX Systems

Being a Miura EX boiler dealer isn't just a supply relationship. It means BTU's team has the product knowledge, technical training, and service infrastructure to support every phase of a Miura EX installation — from initial specification through startup, operator training, ongoing maintenance, and emergency response.

Most jobs fall apart because of timing, not the work itself. BTU's 24/7 availability means that a commissioning delay at 11pm on a Friday doesn't become a week-long shutdown. And for Florida facilities operating in industries where steam downtime has a direct dollar cost, that availability is built into the service model as a baseline expectation, not a premium add-on.

Boiler Technologies Unlimited serves the full Florida market, including Tampa, St. Petersburg, Clearwater, Orlando, Kissimmee, Jacksonville, Gainesville, Tallahassee, Miami, Fort Lauderdale, Boca Raton, West Palm Beach, Fort Myers, Sarasota, Daytona Beach, and Panama City. For facilities outside Florida, BTU's online sales and distribution reach the full continental US.

Boiler Technologies Unlimited operates across every major Florida market. Our supply, installation coordination, and support coverage include the following areas:

Tampa Bay and Gulf Coast: Tampa, St. Petersburg, Clearwater, Sarasota, Bradenton and surrounding communities. Central Florida: Orlando, Lakeland, Kissimmee, Gainesville and the broader I-4 corridor. South Florida: Miami, Fort Lauderdale, Boca Raton, West Palm Beach, Fort Myers, and Cape Coral. Northeast Florida: Jacksonville, Daytona Beach and surrounding industrial areas. North Florida and Panhandle:

Tallahassee, Panama City and the surrounding region.

For operations outside Florida, Boiler Technologies Unlimited supplies parts, systems, and complete Miura LX equipment nationally through online sales.

24/7 emergency service is available statewide. Call 813-469-7733 or email matt@boilertechnologies.com any time.

The decision usually comes down to this question: why move away from what we know?

Cleaver-Brooks, Hurst, and Fulton make serviceable firetube boilers. That's not in dispute. The issue is that firetube technology comes with structural limitations that don't disappear with better build quality. Large water inventory means slow startup. High thermal mass means poor response to variable loads. Shell-and-tube construction means a specific and well-documented failure mode under pressure excursions.

The EX Series Steam Boilers address each of those limitations at the design level, not as patches. Once-through flow eliminates the large water inventory problem. Compact watertube construction improves load response. And the reduced water volume in the system fundamentally changes the physics of a pressure-related failure event.

For a facility evaluating a boiler replacement or expansion, that comparison is worth making with complete information. BTU provides that assessment as part of the sales process. There's no reason to accept a firetube replacement by default when the EX Series is available at competitive terms through an authorized Florida dealer with full service capability.

What makes the Miura EX Series different from a standard firetube boiler like Cleaver-Brooks or Hurst?
The EX Series uses once-through watertube technology, which means far less water is held at pressure at any given time. This translates to faster startup, better load response, lower thermal stress, and a fundamentally different risk profile compared to firetube designs. It's not an incremental improvement. It's a different engineering approach.
What fuel options are available across the EX Series?
Most EX Series models operate as dual fuel steam boilers, capable of running on natural gas, propane, or No. 2 fuel oil. The natural gas propane oil boiler configuration gives operators real flexibility when fuel supply or pricing shifts. The EXN-300 maintains full dual-fuel capability while meeting low-NOx emissions requirements.
What pressure ratings are available in the EX Series and EXH Series?
The extended EX platform covers 170 MAWP, 250 MAWP, and 300 MAWP pressure configurations, with the EXH Series high pressure boiler reaching the 300 MAWP rating. For most commercial and industrial applications, one of those configurations will match the requirement without custom engineering.
How quickly does a Miura EX boiler reach full steam?
Approximately five minutes from a cold start. This is one of the most cited advantages over firetube alternatives, which can take 30 minutes or more to come online. In facilities where demand is variable or boilers cycle frequently, that startup time has a direct impact on operational efficiency.
Is the EXN-300 compliant with Florida and federal NOx emissions regulations?
The Miura EXN-300 low NOx dual fuel boiler achieves 30 ppm NOx performance on both fuel configurations. This meets or exceeds the requirements of most active air quality management districts. BTU can provide specific compliance documentation for Florida-based installations upon request.
Can Boiler Technologies Unlimited support a multi-boiler EX Series installation?
Yes. The modular dual fuel steam boiler architecture of the EX Series is specifically designed for multi-unit configurations. BTU assists with system design, load balancing, redundancy planning, installation, and commissioning for any scale of EX Series deployment, from a single unit to a full plant-wide system.
Does BTU service Miura EX boilers after installation?
That's the baseline expectation. Boiler Technologies Unlimited provides 24/7 emergency service, scheduled preventive maintenance, parts supply, and ongoing technical support for every Miura EX system the team installs or takes over from a previous servicer. Facilities across Florida and nationally have access to that support structure.
How does BTU handle facilities currently running Cleaver-Brooks, Fulton, or Hurst equipment that want to transition to Miura?
BTU conducts a site assessment, reviews current load profiles and space constraints, and builds a transition plan that accounts for installation sequencing, downtime minimization, and operator training. The goal is a transition that doesn't interrupt production. Most facilities are surprised by how manageable the process is when it's planned correctly.